Beyblade Wiki
Register
Advertisement
Icon Research This article is considered a Provisional Article.
As the contents of this article are still being researched, some of the information listed in this article may be incomplete or inaccurate.
Please visit the WBO discussion thread for this article to discuss the draft of this article.


Magical Layer is a Beyblade released as part of the Spin Gear System. It was released in Japan on December 2000 in the Bearing Gyro Beyblade series.


Bit Chip: MOTIF[]

Attack Ring: Gyro Defense[]

Weight: 3.9g

Historically reputed for its survival ability due to a fantastic weight distribution and the shape of its outer edges, and indeed produces exceptional solo spin times. However, the gaps between the two halves of the AR and the flat ends of each half result in very high recoil on impact, meaning it finds more use in offensive combinations than survival types.

The recoil of the gaps largely limit it to wider Weight Disks, as the recoil they cause when exposed counteracts any use for Compacts or Semi-Flat Base Stamina.

The sloped top also results in the Beyblade being pushed downwards by opponents (Force Smashed) and this further exposes the recoil-prone gaps in the AR, which is especially problematic against Circle Survivor Defense on most Zombie tips. These slopes do allow for destabilization of opponents when used in offensive combinations:

as such, despite being one of the best ARs for Solo-Spin times, it is a poor choice for Zombies using standard Survival-oriented tips - but due to great chemistry with SG (Full Auto Clutch Version) Shaft, it is nonetheless one of the best Zombie ARs under the right conditions.

Weight Disk: Gyro Super[]

Weight: 27.2g

Ridiculously heavy (in fact, heavier than the total weight of some early Beyblades), completely round, wider than even Wide Survivor, and with all its weight distributed around its perimeter.

Spin Gear: Gyro Spin Gear[]

Weight: 32.0g

Includes 1x Metal Bearing and 1x Shielded Ball Bearing (listed as "Free Bearing"). Comes without the tip attached, allowing bearings to be swapped as desired, Standard spin gear casings, weight gear and core part. mounted on a long shaft which extends above and below it, which is mounted inside the Gyro Holder (using two bearings) and is used to spin the AR and WD inside the Bearing Gyros when a ripcord is inserted and pulled, just like Magical Ape MS's Gyro Mode. The shaft cannot be fitted to a regular launcher, however aside from the shaft it is a regular Spin Gear.

Blade Base: Gyro Holder Balance[]

"Balance", the Gyro Holder, is a large plastic casing holding the rest of the Beyblade, as well as having a Tip and various frames to hold the top together. It is not legal for competitive play.

Gallery[]

Toyline[]

Anime[]

Manga[]


Trivia[]

References[]

Advertisement