The Unique Line (ユニークライン, Yunīku Rain) is the second Beyblade system of the X Series as part of the Beyblade X toyline. This line features an orange band on the packaging for its products.
For a list of parts in the Unique Line system, see List of Unique Line parts.
Structure[]
Like the previous Basic Line Beyblades, Unique Line Beyblade consists of three main components: the Blade, the Ratchet, and the Bit. The main feature of Unique Line Beyblades is that metal is distributed along the outer perimeter of the Blade, creating higher Outward Weight Distribution (OWD) and greater stability. This is achieved with Launcher Hooks made of resin, rather than metal like Basic Line Beyblades.
In addition, Blades and Bits have "unique" and "one of a kind" features, hence the name of the system.
Blade[]
DranBuster Blade
Blades are the top component of the Bey, and act as the main contact points. The center features a "Gear Chip", showcasing a sticker of the Bey's Avatar, with a symbol indicating the spin direction. The contact points are made from zinc alloy, while the lower sections are made of PMMA.
Blades require three Launcher hooks for insertion, enabling the Bey to launch in either of the two required spin directions, whether clockwise or counterclockwise, depending on the Bey. As mentioned, the Launcher hooks are made of resin instead of metal, increasing OWD as compared to Basic Line Blades. Stoppers prevent the Bey from being spun in the wrong spin direction.
Ratchet[]
1-60 Ratchet
Ratchets are the middle components of the Bey, attaching beneath the Blade. They vary in height and contact point design. A Ratchet attaches to the Blade by twisting, which determines the amount of Burst Resistance in each Bey. Spin direction can be changed by manually twisting the outer portion of the Ratchet, indicated by "L" or "R" spots on the Ratchet as a guide for proper assembly. Ratchets set at a height of .5mm consists of a single piece and do not affect the burst resistance regardless of any Bit.
Bit[]
Accel Bit
Bits act as the main contact points with the stadium floor. Most Bits have the standard 12 tooth gear that interact with the gears on the "X-Celerator Rail" ("Xtreme Line") of the Xtreme Stadium, increasing the Bey's speed. Some Bits have alternate number of tooth gears that changes the speed and frequencies of Xtreme Dashes.
These are the additional subtype series of Bits aside from the standard:
- Low Bits, which are 1mm shorter
- High Bits, which are 1mm taller
- Gear Bits, which have extended teeth to catch onto the X-Celerator Rail easier
- Disk Bits, which have a outer disk that enhance its ability to produce and maintain centrifugal force
- Metal Bits, which have metal contact points
- Free Bits, which spins freely from the Ratchet
- Trans Bits, which changes the height of the Bey when performing an Xtreme Dash
- Bound Bits, which produces shock absorptions with the floor of the Xtreme Stadium
- Rubber Bits, which have rubber contact points
- Under Bits, which are 2mm shorter