|This article is considered a Provisional Article.|
As the contents of this article are still being researched, some of the information listed in this article may be incomplete or inaccurate.
Please visit the WBO discussion thread for this article to discuss the draft of this article.
Xcalius X4 1' Sword, known as Buster Xcalibur 1' Sword (バスターエクスカリバー・ワンダッシュ・ソード, Basutā Ekusukaribā Wandasshu Sōdo) in Japan, is an Attack Type Beyblade released as part of the Burst System as well as the Cho-Z Layer System. It was released as a Starter in Japan on August 11th, 2018 for 1512円.
Energy Layer - Xcalius X4
Main article: Energy Layer - Xcalius X4
Xcalius X4, like its predecessors, is an Attack Type Energy Layer based on the legendary sword Excalibur that features a large sword running down the length of the layer, the end of which protrudes from the bottom which acts as the primary point of contact. Unlike previous Xcalibur Layers such as Sieg Xcalibur and Xeno Xcalibur, Xcalius X4's contact point is very pronounced which creates high Knock-Out and Burst Attack potential, but also creates high recoil. As part of the Cho-Z Layer System, Buster Xcalibur features metal in its design. in this case, the sword is made of metal, akin to its predecessor Sieg Xcalibur. However the tip of the sword is covered in plastic, to reduce the possibility of breaking the opponent's Layer. Buster Xcalibur also features a gimmick, the sword can extend further from the rest of the Layer to create a "Buster Mode".
The inclusion of metal increases the weight of the Layer, granting higher inertia that increases both Knock-Out and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Japanese release. However the asymmetrical design of the metal sword means that this Layer is incredibly unbalanced, a trait that drains the Stamina of Combinations and can break a Combination's banking pattern. Furthermore, the shape of the Layer makes it a very poor choice for Opposite Spin matchups. Finally, Buster Xcalibur is so unbalanced that it cannot be used with unbalanced Discs such as 1, else it will lose Stamina too quickly to be effective in battle.
Due to the nature of the gimmick, the recoil of Buster Xcalibur can be adjusted by either retracting or extending the sword. However, the locking mechanism for the gimmick is weak, meaning that Buster Xcalibur is prone to switching to "Buster Mode" midway through the battle even if it was set to "Normal Mode". Like other Cho-Z Layers and previous Xcalibur Layers, Buster Xcalibur is unbalanced which increases Burst risk and drains Stamina. Due to how unbalanced Buster Xcalibur is, these issues cannot be solved with the use of a Level Chip that fits underneath the Layer.
Forge Disc - 1'
Main article: Forge Disc - 1'
1', like other odd numbered Core Discs, is asymmetrical and elliptical in order to facilitate a Disc Frame. One side features two small sword-tip like protrusions and the other side features the same protrusions along with a single, larger protrusion of the same shape. 1''s gimmick, like its predecessor 1, is that it is unbalanced, it achieves this by having the side with the larger protrusion being more filled in with metal than the other, akin to Quarter. This weight distribution has two primary uses: The first is to increase the Burst Attack of Attack Combinations by generating momentum like a flail which is further enhanced by the heavy weight of 1'. The second is to make a Combination using an unbalanced Layer such as Buster Xcalibur more properly balanced by aligning the heavier side opposite the the heavier side of the Layer which increases Stamina and Burst resistance.
However, compared to 1, 1' is only slightly unbalanced as both sides are mostly filled in with metal, unlike in 1 where one side was hollowed out. While this makes 1' heavier, it also significantly reduces the synergy with an Xcalibur Layer and the Disc is still lighter than more commonly used Discs such as 0.
Performance Tip - Sword
Main article: Performance Tip - Sword
- Like its predecessors Xcalius X2 Magnum Impact and Xcalius X3 1 Iron, Xcalius X4's Japanese name, Buster Xcalibur, is based on the word "buster", a thing that breaks, destroys, or overpowers something, and from the legendary sword Excalibur from Arthurian tales.
- Like Xcalius X3 1 Iron, Xcalius X4's avatar is an armored humanoid wielding a large blade. The only difference, however, is that Xcalius X4's avatar is a full humanoid, not like Xcalius X3's, which was a sword that transformed into a humanoid.
- Unlike its predecessors, Xcalius X4 is wielded by a new character named Xavier Bogard in Beyblade Burst Turbo, instead of Xander Shakadera.
- Similar to how Xcalius X3 was created in the anime, Xcalius X4 was forged into a sword then created into a Beyblade.
- This Bey has the first Core Disc that is not just numbers.
- In the Turbo anime, Xcalius X4 possesses a gold Level Chip.